Товар добавлен в корзину
SM120-3VM Следующий ![SM120-3VM](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 125 145" width="125" height="145"></svg>)
SM115-3RI Предыдущий ![Danfoss](data:image/svg+xml;utf8,<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 63 25" width="63" height="25"></svg>)
SM115-3RI Предыдущий 
SM120-3VI
По запросу
SKU
r_danfoss_SM120-3VI
SM120-3
Цены со скидкой действуют при заказе от 7000 руб
Минимальная сумма заказа составляет 4000 руб
Characteristic |
Value |
| Type | SM |
| Net weight | 74.00 Kg |
| Approval standards | CE certified; UL certified (file SA6873) |
| Brand technique | Scroll compressor |
| Configuration code | Single |
| Connection type | Brazed |
| Discharge connection pipe size [in] | 7/8 |
| Discharge connection size [in] | 7/8 |
| Drawing number | 8552037b |
| EAN | 5702428839419 |
| Factory HP [bar] | 33 |
| Factory LP [bar] | 25 |
| Fitting standard | ODF |
| Frequency [Hz] | 60 |
| GP LP torque [Nm] | 15 |
| Gauge port HP | None |
| Gauge port LP | Schrader |
| Generation code | C |
| Glass mounting | Threaded |
| Glass torque [Nm] | 50 |
| Gross weight | 74.00 Kg |
| High value of nominal voltage at 60Hz [V] | 230 |
| High value of voltage range at 60Hz [V] | 253 |
| IP protection class | IP54 (with cable gland) |
| LRA | 237 A |
| Low value of nominal voltage at 60Hz [V] | 200 |
| Low value of voltage range at 60Hz [V] | 180 |
| MCC | 50 A |
| Model number | SM120S3VC |
| Motor protection | Internal overload protector |
| Mounting torque [Nm] | 21 |
| Nominal cooling capacity at 60Hz | 36.7 |
| Number of starts per hour [Max] | 12 |
| Oil charge [cm3] | 3.25 |
| Oil equalization | 3/8'' flare SAE |
| Oil equalization torque [Nm] | 48 |
| Oil reference | 160P |
| Packaging height [mm] | 596 |
| Packaging length [mm] | 470 |
| Packaging weight [Kg] | 78 |
| Packaging width [mm] | 370 |
| Packing format | Single pack |
| Packing quantity | 1 |
| Phase | 3 |
| Power connections | Screw 4.8 mm |
| RLA | 35.7 A |
| Refrigerant | R22; R417A-160SZ |
| Refrigerant charge [kg] [Max] | 10 |
| Relief valve | None |
| Rotational speed at 60Hz [rpm] | 3500 |
| Shipped instructions | Installation instructions |
| Shipped mounting | Mounting kit with grommets, bolts, nuts, sleeves and washers |
| Shipped oil | Initial oil charge |
| Speed Platform | Fixed-speed |
| Suction connection pipe size [in] | 1 3/8 |
| Suction connection size [in] | 1 3/8 |
| Swept volume [cm3] | 166.6 |
| Technique | Scroll |
| Test HP [bar] [Max] | 32 |
| Test LP [bar] [Max] | 25 |
| Test dif [bar] [Max] | 24 |
| Torque earth [Nm] | 2 |
| Torque power [Nm] | 3 |
| Type designation | Compressor |
| Viscosity [cP] | 32 |
| Winding resistance for three-phase compressors with identical windings [Ohm] | 0.26 Ohm |
| • Acoustic hood 1 | 7755010 |
| • Acoustic hood 1 Description | Acoustic hood for scroll compressor S110-S120 |
| • Acoustic hood 2 | 120Z0356 |
| • Acoustic hood 2 Description | Bottom insulation for scroll compressor |
| • Belt 01 | 120Z0361 |
| • Belt 01 Description | Surface sump heater + bottom insulation, 48 W, 24 V, CE mark, UL |
| • Belt 02 | 120Z0380 |
| • Belt 02 Description | Surface sump heater + bottom insulation, 48 W, 230 V, CE mark, UL |
| • Belt 07 | 7773109 |
| • Belt 07 Description | Belt type crankcase heater, 65 W, 110 V, CE mark, UL |
| • Belt 08 | 7773107 |
| • Belt 08 Description | Belt type crankcase heater, 65 W, 230 V, CE mark, UL |
| • Discharge gasket | 8156132 |
| • Discharge gasket Description | Gasket, 1-3/4" |
| • Discharge temperature protection | 7750009 |
| • Discharge temperature protection Description | Discharge thermostat kit |
| • Discharge valve | 8168030 |
| • Discharge valve Description | Rotolock valve, V05 (1-1/4" rotolock, 7/8" ODF) |
| • Ebox cover | 8156135 |
| • Ebox cover Description | Service kit for terminal box 96 x 115 mm, including 1 cover, 1 clamp |
| • FSA connector | 023U8014 |
| • Gasket set | 8156013 |
| • Gasket set Description | Gasket set, 1-1/4", 1-3/4", 2-1/4", OSG gaskets black and white |
| • Mounting kit 1 | 8156138 |
| • Mounting kit 1 Description | Mounting kit for one-scroll compressor, including 4 grommets, 4 sleeves, 4 bolts, 4 washers |
| • Oil 1 | 7754001 |
| • Oil 1 Description | Mineral oil, 160P, 2-litre can |
| • Oil sight glass | 8156019 |
| • Oil sight glass Description | Oil sight glass with gaskets (black and white) |
| • Oil sight glass gasket | 8156129 |
| • Oil sight glass gasket Description | Gasket for oil sight glass (white teflon) |
| • Solder sleeve set | 120Z0405 |
| • Solder sleeve set Description | Solder sleeve adaptor set (1-3/4" rotolock, 1-3/8" ODF), (1-1/4" rotolock, 7/8" ODF) |
| • Suction gasket | 8156132 |
| • Suction gasket Description | Gasket, 1-3/4" |
| • Suction sleeve | 8153003 |
| • Suction sleeve Description | Solder sleeve, P10 (1-3/4" rotolock, 1-3/8" ODF) |
| • Suction valve | 8168022 |
| • Suction valve Description | Rotolock valve, V10 (1-3/4" rotolock, 1-3/8" ODF) |
| • T block | 8173230 |
| • T block Description | T block connector 52 x 57 mm |
| • Valve set | 7703392 |
| • Valve set Description | Valve set, V10 (1-3/4"~1-3/8"), V05 (1-1/4"~7/8") |
Напишите ваш собственный отзыв
Сопутствующие товары
